Preparing For Use; Inserting / Replacing The Batteries - Silvercrest STK 36 B2 Montage-, Bedienungs- Und Sicherheitshinweise

Preparing for use

For first time use, please remove the protective foil
name plate
the recess on the transmitter.
Replace the protective foil

Inserting / replacing the batteries

Insert the batteries to provide power to the product before prepar-
ing it for use.
CAUTION! Use the above-indicated battery types only. Failure to
observe this advice may result in damage to the product.
Receiver:
Remove the battery compartment cover
Remove the used batteries, if present.
Insert 2 batteries (1.5 V
Note: Ensure correct polarity. This is indicated in the battery
compartment
Close the battery compartment
Transmitter:
Remove the holder
of the transmitter and insert your name plate
13
19
(direct current), type AA).
.
9
and screw
15
on the transmitter.
from the back of the product.
10
.
9
from the back of the transmitter.
18
from the
19
into
13
GB 13