Weigh And Add; Remove Part Of The Weighed Food; Set The Countdown Timer / Alarm - Silvercrest HG01696A Bedienungs- Und Sicherheitshinweise

Select the unit of weight by pressing the unit of
weight button . You can choose between
6
"g / kg" and "oz / lb".
Place the food you wish to weigh in the weigh-
ing bowl .
1
The LCD readout
5
food in the selected unit of weight.
Note: If the kitchen scale
LCD readout indicates "Err" and it will switch
5
off within 3 seconds. Remove food from the kitchen
scale then press the ON/OFF button
on the kitchen scale again.

Weigh and add

Q
The kitchen scale allows you to weigh foods
2
consecutively without removing food already in the
weighing bowl .
1
Place the weighing bowl
scale .
2
Press the ON / OFF button
kitchen scale on.
2
Select the unit of weight by pressing the unit of
weight button . You can choose between
6
"g / kg" and "oz / lb".
Place the food you wish to weigh in the weigh-
ing bowl .
1
The LCD readout
5
food in the selected unit of weight.
Now press the Zero button
scale now reads "TARE".
2
Now place more food in the weighing bowl
The LCD readout
5
food you have added in the selected unit of weight.
Continue in this way only until the maximum
capacity of the kitchen scale
the weighing bowl
Remove part of the
Q
weighed food
Place the weighing bowl
scale .
2
10 GB/CY
indicates the weight of the
is overloaded, the
2
to switch
3
on the kitchen
1
to switch the
3
indicates the weight of the
. The kitchen
7
indicates the weight of the
is reached or
2
is full.
1
on the kitchen
1
Press the ON / OFF button
kitchen scale
Select the unit of weight by pressing the unit of
weight button
"g / kg" and "oz / lb".
Place the food you wish to weigh in the weigh-
ing bowl
1
The LCD readout
food in the selected unit of weight.
Now press the Zero button
Now remove the required amount of food from
the weighing bowl
The LCD readout
food you have removed as a negative number.
Now press the Zero button
scale now reads 0 g / 0.0 oz and "TARE"
2
for further removal / adding food.

Set the countdown timer / alarm

Q
The timer on the kitchen scale has a time span of
00:10 to 99:50 minutes. The set time is counted
down in reverse to "00:00". An alarm signal then
sounds and the alarm display " "
Press the ON / OFF button
kitchen scale
Press the Timer button
Set the required time by pressing the Timer button
" " , or the Timer button " "
6
Press the Timer button
set time and to start the countdown timer.
Press the Timer button
. countdown timer.
1
Press the Timer button
time to "00:00".
NOTE: When the set time has elapsed, an alarm
signal sounds.
Press the ON / OFF button
at the same time switch off the kitchen scale
to switch the
3
on.
2
. You can choose between
6
.
indicates the weight of the
5
.
7
.
1
indicates the weight of the
5
. The kitchen
7
flashes.
15
to switch the
3
on.
2
.
4
7
again to confirm the
4
again to stop the
4
again to reset the set
4
to stop the alarm and
3
.
.
2