Product Safety Information; Product Specifications - Ingersoll-Rand G3 Serie Technische Produktdaten

Product Safety Information

Intended Use:
These Air Sanders are designed for both light and heavy sanding jobs such as
roughing body filler, removing rust, and smoothing welds.
For additional information refer to Air Sander Product Safety Information Manual
Form 04580387.
Manuals can be downloaded from www.ingersollrandproducts.com

Product Specifications

Free
Speed
Model(s)
rpm
G3L086RS10 8600
G3L086PS10 8600
† K = 3dB measurement uncertanity
pA
‡ K = 3dB measurement uncertanity
wA
# See drawing 16597205 on page 2
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16573784 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
80223241_ed2
Sound Level dB (A)
Arbor
(ISO15744)
Size
† Pressure (L
5/8"-11 83.2
5/8"-11 82.0
) ‡ Power (L ) # Handle 1 # Handle 2
p w
94.2
93.0
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease
EN
Vibration Level
(ISO28927) m/s²
<2.5 <2.5
<2.5 <2.5
EN-1