Dehumidifying Operation - Hitachi RAK-18PPA Bedienungsanleitung

DEHUMIDIFYING OPERATION

Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
■ Dehumidifying Function
When the room temperature is higher than the temperature setting: The device will dehumidify the
●
room, reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at
the temperature setting slightly lower than the current room temperature, regardless of the temperature
setting.
The preset room temperature may not be reached depending on the number of people present in the
●
room or other room conditions.
Press the MODE selector button so that the display
1
indicates (DEHUMIDIFY).
The fan speed is set at LOW.
Press (FAN SPEED) button to select SILENT or LOW fan
speed.
Set the desired room temperature with the ROOM
TEMPERATURE setting buttons (the display indicates the
setting).
2
The range of 20-26°C is recommended as the room
temperature for dehumidifying.
START
Press the
starts with a beep. Press the button again to stop operation.
STOP
■ As the settings are stored in the memory of the remote controller, you
only have to press the
– 12 –
– 12 –
(START/STOP) button. Dehumidifying operation
(START/STOP) button next time.