Care And Cleaning - Kenwood ZJM300 Bedienungsanleitungen

key
a lid
b water level gauge
c on/off switch
d power on light
e 360° powerbase
f cord wrap
g filter
to use your kettle
1 Fill the kettle through either the spout
or by removing the lid. The water
level must be between 'MAX' and
1 cup (250mls).
If you live in a hard water area we
l
recommend that you use filtered
water in order to maintain the
appearance and efficiency of your
kettle.
Be economical: do not boil more
l
water than you need.
To improve the quality of your drinks
l
always use fresh water.
Empty the kettle after each use.
l
Rinse out with fresh water if the
l
kettle has not been used for more
than 2 days.
2 Check the lid is fitted correctly.
3 Plug in and switch on. The power on
light d will come on.
4 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
Note - To interrupt the boiling
ensure that the switch is
in the off position before
removing from the powerbase.
If you experience problems
l
with your kettle switching
on and off during use or
switching off before boiling,
check that the flat element
is free from scale - see
"descaling".
Your kettle is fitted with a filter to
l
hold back limescale particles.
If you find drops of water under
l
your kettle, do not worry - it is just
condensation.
English
boil-dry protection
If you switch on with too little water,
l
your kettle will cut out automatically.
Switch off, remove from the
powerbase and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.

care and cleaning

Before cleaning, unplug your kettle
l
and let it cool down.
the outside and powerbase
Wipe with a damp cloth, then
l
dry. Do not use abrasives - they
will scratch the metal and plastic
surfaces.
the inside
Wipe with bicarbonate of soda on a
l
damp cloth. Rinse thoroughly.
Even though your kettle comes with
l
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 Remove the lid.
2 Lift the filter out away from the spout
area
3 either rinse under the tap or use a
soft brush or when descaling your
kettle, drop the filter in too. Rinse
thoroughly.
4 Place the filter back in the spout
area and push down to secure
descaling
Regular descaling of the flat element
l
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
problems may be experienced
l
with the kettle switching on and
off during use or switching off
before boiling.
the kettle may take longer to boil.
l
the flat element may be damaged.
l
Please note: Failure to descale your
kettle may invalidate your guarantee.
When limescale starts to build up on
l
the heating element, buy a suitable
descaler and descale your kettle.
After descaling, boil with fresh water
several times and discard. Clean
any descaler off the kettle - it can
damage the parts.
4
1 .
2 .