Operating The System; Basic Operation - Dometic Connect Panel Bedienungsanleitung

Operating the system

5 Operating the system
5.1

Basic operation

I
NOTE
Symbols are only shown on the display if the corresponding vehicle
technology is connected. The symbols and settings displayed can vary
depending on the manufacturer and model.
Control unit
Item in
fig. 1, page 3
1
2
3
4
You can access menus and enter settings as follows:
• by touching the sensor buttons
• by touching a symbol on the navigation bar
• by touching a symbol on the display which has a rectangular frame
An activated function is displayed with a highlighted background.
Touch logic
If only one setting is available (e.g. air conditioner ON/OFF):
➤ Press the corresponding touch symbol.
✓ The corresponding setting is displayed.
If several settings are available (e.g. air conditioner modes or fan speeds):
➤ Press the corresponding touch symbol multiple times until you reach the desired
setting.
✓ The corresponding setting is displayed.
12
Explanation
Status bar
Control panel
Navigation bar
Sensor buttons
Connect Panel
EN