Technical Information; Environment Concerns - Zanussi ZDT12002 Benutzerinformation

Problem
The dishes are wet.
The dishes are wet and matt.

Technical information

Dimensions
Electrical connection
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease
energy consumption.

Environment concerns

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
26
Possible cause
• The programme had no drying phase.
• The programme had a low tempera-
ture drying phase.
The rinse aid dispenser is empty.
The quality of the rinse aid can be the
cause.
Width / Height / Depth (mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
Cold water or hot water
Place settings
For better drying results, keep the door
ajar for some minutes.
Make sure that there is rinse aid in the
rinse aid dispenser.
Try a different brand of rinse aid.
2)
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
• Discard correctly the packaging material. Recycle the
materials with the symbol
Possible solution
596 / 818-898 / 555
220-240 V
50 Hz
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
.
12