Names Of Each Control - Teac LT-1 Bedienungsanleitung

A Disc cover
Press the L mark on the disc cover to open it.
B SNOOZE button
After the on time is reached, use this button to turn
the unit off for 5 minutes.
C POWER switch
Press this switch to turn the unit on and off.
The equipment draws nominal nonoperating
power from the AC outlet with its POWER switch
in the OFF position.
D CD, TUNER buttons (FUNCTION button)
Press the CD button to play a disc.
Press the TUNER button to listen to the radio.
Press the FUNCTION button repeatedly when using
the remote control unit.
E BAND button
Use this button to select FM or AM.
F Display
G CD operation buttons
When TUNER is selected, these buttons won't work.
STOP button (H)
Use this button to stop playback.
PLAY/PAUSE button (y/J)
Use this button to start or pause playback.
SKIP/SEARCH buttons (. m / , /)
Press these buttons to skip tracks.
Hold down these buttons to search for a part of a
track.
H Speakers (stereo)
I Remote sensor
J SHUFFLE button
Use this button to select shuffle playback mode.
K REPEAT/PRESET button
Use this button to change the repeat mode or select
a preset number and station.
L MEMORY/CLOCK ADJ button
Use this button to program tracks or to adjust the
clock.

Names of Each Control

M VOLUME knob
Turn this knob to adjust the volume.
N Subwoofer
O BASS CONTROL knob
Use this control knob to adjust the subwoofer level.
P TUNING knob
Turn this knob to tune in a station.
Q MUTING button
To cut the sound temporarily, press the MUTING
button. Press the MUTING button again to restore
the sound. If you change the volume during the
muting, the muting will be canceled.
R DISPLAY button
Use this button to change the display mode.
S TIMER/SLEEP button
Use this button to set the timer or sleep timer.
T PHONES
Insert the headphones plug into the PHONES jack,
and adjust the volume.
Both stereo and monaural earphones can be used
with this unit.
U SLEEP button
Use this button to set the sleep timer.
V Holder for Remote Control Unit
Place the remote control unit when not in use.
You can detach the holder by using a screw driver,
if you don't need it.
W FM feeder antenna
Tune in an FM station and extend the lead to find the
best position for the reception. Then fix it to the wall
with thumb tacks or the like.
X AC Power Cord
Plug this AC power cord into an AC wall socket.
ENGLISH
13