NOTICE
The last tuned radio frequency is used for the radio alarm wake-up sig-
nal.
Press the
or
In radio alarm mode: press the
dio playback.
Press the
or
Press the
or
L10). If you do not want to activate the light, select OFF.
NOTICE
Around 30 minutes before the set alarm time, the light
turns on and gradually increases in intensity to the set
value.
Press the
or
At the set alarm time, the alarm sounds or the radio will be automatically turned on.
The mood light above the control panel lights up in alternating colours.
NOTICE
If the alarm is not switched off within 30 minutes, it ter-
minates automatically and will go off again in 24 hours
(depending on the selected alarm programme).
7.5.2. Activating/deactivating the alarm
In time display mode, press and hold the
activate or deactivate the alarm AL1 or AL2.
If the alarm is activated, the symbol AL1 and/or AL2 will appear on the display.
7.5.3. Interrupting the alarm
When the alarm sounds, press the
alarm is stopped and repeats nine minutes later. If the light alarm function is ac-
tivated, the light is switched off when the alarm is interrupted and the AL1 or
AL2 display flashes.
button to confirm.
or
button to confirm.
button to set the intensity of the wake-up light (L01–
button to confirm.
button to adjust the volume of the ra-
or
button for about 2 seconds to
button to interrupt the alarm. The
ES
EN
DE
41 of 70