SOUNDMASTER PL979 Bedienungsanleitung Seite 20

6. When the tone arm reaches the end of the record it automatically returns to the tone arm
rest and the record player stops.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the turntable
without securing the tone arm clamp could result in damage to the tone arm.
SPEED ALIGNMENT
The pitch adjust control is made to adjust the turntable speed lightly. Start the playback of the
record and listen to the music. Adjust the pitch adjustment knob until the correct speed is heard.
TONE ARM STOPPING POSITION ALIGNMENT
The position of the tone arm for a complete playback and return to the rest station can be
adjusted at the alignment screw as follow:
1. Before starting the alignment, please take out the hole covering rubber.
2. If the system cannot complete the playback of record
and return earlier, use a cross head screw driver and
turning the alignment screw inside the hole clockwise,
the stopping and eject position of the tone arm will
move more inward to the center of the record for
playback completion.
3. If the system cannot return to rest position
automatically after playback of record, use a cross
head screw driver and turning the alignment screw
inside the hole anti-clockwise, the stopping and eject position of the tone arm will move
more away from the center of the record for playback completion.
Press the "MODE" button to select the AUX mode. Insert the audio cable (not included) into the
"AUX-IN" socket of the unit.
Start the playback of the connected device and you can hear the sound in PL979SW.
CD/MP3 RECORDING
Recording one track:
1. Plug USB drive into USB socket.
2. During the CD/MP3 playing mode, press the "RECORD" button one time, "Checking" then
"REC USB" will show on the display.
3. Press "RECORD" button again. The display will show "REC One".
4. Then press the "RECORD" button to confirm. The unit will start record the playing track.
Recording all tracks:
1. During the CD/MP3 stop mode, press the "RECORD" button one time, "REC USB" will show
on the display.
2. Press the "RECORD" button again. The display show "REC All".
3. Then press the "RECORD" button again to confirm. The unit will start record all tracks.
AUX-IN
USB RECORDING
7
PL979 / English Instruction Manual