Analysing Measurements - Silvercrest 322246 Gebrauchsanleitung Und Sicherheitshinweise

automatically transferred to the app. The pulse
oximeter will then automatically switch off.
Option 2: After measurements are taken, the data
will automatically be sent to the app. "SYNC" will
flash on the display 1 .
The device will attempt to connect to the app for
30 seconds.
Once connected, "SYNC" will stop flashing.
All stored measurements will be automatically
transferred to the app. The pulse oximeter will
then automatically switch off.
If Bluetooth is deactivated ( OFF), the notification
®
OFF will be displayed after your measurement
has been carried out.

Analysing measurements

The following table for as-
sessing measurements does NOT apply to persons
with certain pre-existing conditions (e.g. asthma,
heart failure, respiratory disorders) and in altitudes
over 1500 metres.
If you have a pre-existing condition, always con-
sult your physician to analyse your measurements.
GB/CY 31