Ricoh Pro 8300S Bedienungsanleitung Seite 12

1. Safety Information for This Machine
3.
For correct handling of the waste toner bottle, see page 6 "Requirements for Handling
Supplies".
4 and 5.
Keep your hands clear of the parts a label indicates. Otherwise, you might trap your fingers
and an injury might occur.
6.
Do not touch the parts a label indicates. Otherwise, an injury might occur.
7 8 9
9
14
7, 8, and 9.
Do not touch the parts a label indicates. Otherwise, an injury might occur.
10.
Do not touch the parts a label indicates. The inside and surface of the fusing unit could be
very hot. Caution should be taken when removing misfed paper.
11.
Do not touch the parts the label indicates. These parts may become very hot. Wait and do
not touch these parts until they cool down. Otherwise, burns might occur. It may take up to
20 minutes for the parts to cool down after a large number of pages have been continuously
printed.
8
8
10
9
7
11
7 13
12
12.
This label indicates the weight of the unit. However, this label is meant for customer engineers
and operators who have received training. Do not lift a unit that has this label.
13.
The inside could be very hot. Keep your hands clear of the parts a label indicates. Otherwise,
an injury might occur.
14.
Do not touch the parts a label indicates. The web of the fusing unit could be very hot. Caution
should be taken when removing misfed paper.
Three-tray Wide LCT
EAQ011
1.
High temperature parts. Do not touch the parts which a label is put on. Otherwise, an injury
might occur.
2.
Do not touch the parts a label indicates. The inside of the machine could be very hot.
1
2
DWR002