Adjusting The Cutting Height; Maintenance - Husqvarna AUTOMOWER 105 Bedienungsanleitung

without having an account you can still use
®
Automower Connect@Home by selecting
®
Automower Direct in the start-up screen in
the app.

4.6 Adjusting the cutting height

If the grass is long, let the product start
mowing at the MAX cutting height. Once the
grass is shorter, you can gradually lower the
cutting height.
CAUTION:
During the first week
after a new installation, the cutting
height must be set to MAX to avoid
damaging the loop wire. After this,
the cutting height can be lowered
one step every week until the
desired cutting height has been
reached.
®
4.6.1 Automower 105
The cutting height can be varied from MIN (2
cm / 0.8") to MAX (5 cm / 2.0"). To adjust the
cutting height:
1. Push the STOP button to stop the
product. Then open the hatch.
2. Turn the height adjustment knob to the
required position. The selected position is
indicated by the orange column on the
height adjustment indicator.
5.1 Cleaning
For better operation and longer service life,
make sure to clean the product regularly and
replace worn parts. The product does not
operate satisfactorily in slopes if the wheels
1418 - 001 - 04.12.2019
1 2 3 4 5

5 Maintenance

®
4.6.2 Automower 305/310/315/315X
The cutting height can be varied from MIN (2
cm / 0.8") to MAX (6 cm / 2.4") in 9 steps.
1. Push the STOP button to stop the product
and open the cutting height adjustment
hatch.
2. Turn the knob to the required position.
Turn clockwise to increase and counter-
clockwise to decrease the cutting height.
The arrow aligns with the selected
position marked on the body.
305
®
4.6.3 Automower 420/430X/440/450X
The cutting height can be varied from MIN to
MAX in 9 steps.
1. Push the STOP button to stop the product
and open the hatch.
2. Push the MENU button to access the
main menu.
3. Move the cursor using the up/down arrow
buttons to select menu
4. Push OK.
5. Increase/Decrease the cutting height with
the arrow buttons.
are blocked with grass. Use a soft brush to
clean the product.
Husqvarna offers a special cleaning and
maintenance kit as an accessory. Contact
your local Husqvarna representative.
310/315/315X
Cutting height .
Maintenance - 21