Fitting Procedure - Sony DCBK-160A Installationsanleitung

Fitting Procedure

1
2
Remove the DSR-70A/70AP battery panel (four screws)
and cover plate (two screws).
Note
Take care not to lose the cover plate or screws.
Insert the connector panel and its attached cables and
harness into the hole left by the cover plate. Pull the cables
and harness one at a time through the DSR-70A/70AP
board slot space and up to the top.
Secure the connector panel using the screws removed from
the cover plate in step 1.
Battery panel
Screws
Cover plate
Screws
Connector panel
(Continued)
17