Futurelight PRH-360 Pro-Rotating-Holder Bedienungsanleitung Seite 29

Before taking into operation for the first time, the installation has to be approved by an expert!
(1) Omega-holders
(2) Clamp
(3) Safety-rope
(4) Quick-lock fastener
The banner holder can either be placed
directly on the stage floor or rigged as
shown in the drawing.
For overhead use (mounting height >100
cm), always install a safety-rope that can
hold at least 12 times the weight of the
device. You must only use safety-ropes with
quick links with screw cap. Pull the safety-
rope through the hole on the bottom of the
base and over the trussing system etc.
Insert the end in the quick link and tighten
the fixation screw.
The maximum drop distance must never
exceed 20 cm.
A safety rope which already hold the strain
of a crash or which is defective must not be
used again.
DANGER TO LIFE!
29/79 00024219.DOC, Version 1.2