Maintenance; General Description - GYS BTW 300 Bedienungsanleitung

Translation of the original instructions

Maintenance :

• Service should be performed by a qualified person.
• If the internal fuse blows, it must be replaced by the manufacturer, its after-
sales service or a qualified person to avoid any danger.
• Never use solvents or other aggressive cleaning agents. Clean the surfaces
of the unit with a dry cloth.
The device complies with European Directive.
The certificate of compliance is available on our website.
EAC conformity mark (Eurasian Economic Commission)
This product should be disposed of at an appropriate recycling facility. Do
not dispose of in domestic waste.
Product whose manufacturer is involved in the packaging's recycling pro-
cess by contributing to a global system of sorting, collecting and recycling
of households' packaging waste.
Recyclable product that falls within waste sorting recommendations.

GENERAL DESCRIPTION

With very high specs, the tester BTW 300 is designed to test the battery and the charging system of a vehicle via
a smartphone or a tablet equipped with Bluetooth technology. Easy to use using the dedicated application, it will
keep the test history to improve the management of the fleet of vehicles.
FEATURES
- Battery 6 and 12 V : test of the voltage and charge status.
- Starter 12 and 24 V : tests the starting voltage.
- Alternator circuit 12 and 24 V : tests no load voltage and charging voltage as well as current undulation during the
charge.
BATTERY TYPES
Compatible with 4 lead-acid battery types from 7 to 240 Ah :
· Sealed batteries VRLA / GEL / AGM FLAT / AGM SPIRAL
· Open batteries FLA
· START / STOP batteries (EFB/AGM)
· Batteries for electric vehicles (DEKA®, EXIDE®, JCI®, TROJAN®, US BATTERY®)
INSTALLATION OF THE APP
1. Download and install the «DHC Sync» application via App Store or Google Play. Note: Requires an iOS 8.0 or higher
for Apple devices. OS 4.3 version or higher for Androïd devices.
2. Once the application is installed, open the application and register :
- Select «New user»
- Fill in the mandatory fields and tick «I accept the general conditions». Select «Continue».
8
BTW 300
1. battery clamps
2. LED indicator light (blue) : Connected
3.  LED indicator light (green): On
4. LED indicator light (red) : Failure
5. Reset button
EN
8