A: Cable hole
A2. FOR RESTARTING A WARM ENGINE:
Do not use the choke when the engine is warm.
Move the throttle control slightly past
B1. FLYWHEEL BRAKE MODELS:
Move the starter control handle (located on equipment) to release the flywheel brake.
NOTICE: The engine will stop if you release the starter control handle.
Do not allow the starter grip to snap back against the engine. Return the handle slowly then allow
the starter cord rewind it, to prevent damage to the starter.
1. Starter grip
B2. FLYWHEEL BRAKE MODELS:
Continue to hold the starter control handle (located on equipment). The engine will stop if you
release the starter control handle.
STOPPING THE ENGINE
1. Flywheel brake models:
Release the starter control handle (located on equipment) to stop the engine.
position.
6 / 20