Inhaltsverzeichnis
Werbung
en
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
A technician who is called out to give advice will charge you, even if the appliance is still
under guarantee.
Fault
Possible cause
Interior light does
The bulb is defective.
not function.
Light switch is sticking.
Fig. t/A
The frozen food is frozen
solid.
There is a thick layer
of frost in the freezer
compartment.
Floor of the refrigerator
The condensation outlet is
blocked. Fig. 3
compartment is wet.
If the display, Fig. 2/8,
The freezer compartment
flashes
became too warm due
to a power failure
or malfunction.
The ventilation openings
have been covered.
28
Remedial action
Change the bulb Fig t/B
1. Pull out the mains plug or disconnect
the fuse.
2. Remove bulb cover from the rear.
3. Change the bulb
(replacement bulb, 220-240 V a.c.,
E14 lampholder, see defective bulb
for wattage).
Check whether it can be moved.
Loosen frozen food with a blunt object.
Do not use a knife or pointed object.
You could damage the refrigerant tubing
or the plastic surface.
Defrosting the freezer compartment
(see Defrosting).
Clean the condensation channel and outlet
Fig. 3, see Cleaning the appliance.
When the button, Fig. 2/2, is pressed,
the warmest temperature reached
in the freezer compartment is displayed,
Fig. 2/8, for five sec. and then cleared.
The display stops flashing. If the displayed
temperature is more than +3 ºC, prepare
a ready meal by boiling or frying the frozen
food and refreeze. No longer store the frozen
produce for the max. storage period.
Remove obstacles.
Werbung
Inhaltsverzeichnis
