Intended Use; Minimum System Requirements - Dometic Remote Water Pump Montage- Und Bedienungsanleitung

Remote Water Pump
4

Intended use

The Dometic Remote Water Pump is designed for use with MasterFlush®
toilet models 7165, 8165.
The remote water pump provides quiet and thermally protected performance
in a demand-based toilet water supply system. The integrated strainer filters
raw water or sea water to protect the toilet from small particles that may be
suspended in raw water.
The remote water pump is self-priming up to 1.83 m (6') and dry-run capable.
It features a sealed switch, sealed and thermally protected motor, corrosion-
resistant electro-coated motor and ignition protection (CE).
5

Minimum system requirements

!
CAUTION! Electrical hazard
Do not connect the remote water pump directly to standard resi-
dential wiring system. The water pump operates at 12 Vg.
I
NOTE
Electrical requirements are shown for remote water pump and
macerator toilet on one circuit. For individual component electrical
specifications, see chapter "Technical data" on page 16, and the
toilet's installation manual.
 Electrical
– Current consumption (average): 20 A at 12 Vg
– Fuse/breaker: 25 A (macerator toilet and remote water pump are com-
bined in one circuit)
 Water supply
– pump location: within 1.8 m (6') of water source
– pump inlet/outlet: ¾" ID flexible high-pressure hose
– toilet inlet: ¾" ID flexible high-pressure hose
 Discharge
– Toilet: 1" or 1½" ID sanitation hose
EN
Intended use
7