Switching On The Appliance - BORETTI BV-89 Bedienungsanleitung

Switching On the Appliance

• Before switching on, place the appliance on upright position
and wait at least three hours without moving the appliance. This
will give the refrigerant circuit time to settle and operate efficiently.
• Clean the appliance thoroughly, especially in the interior, before use (See Cleaning and
Maintenance).
• Installation of the appliance and electrical connections must be
carried out by a qualified technician, in accordance with the
Installation Manual and local regulations.
• Installation procedure into the kitchen unit is given in the Installation
Manual. This product is intended to be used in proper kitchen units
only.
• The appliance must be connected with a properly installed fused
socket. Power supply (AC) and voltage at the operating point must
with the details on the name plate of the appliance (name plate is
located on the inside left of the appliance).
• Insert the plug into a socket with an efficient ground connection. If the socket has no ground
contact or the plug does not match, we suggest you to call an authorized electrician for
assistance.
• Manufacturer is not responsible for failure to complete the ground connection as described in
this booklet.
• There can be an odor when you first switch on the appliance. It will disappear after the
appliance starts to cool.