Boiling Water; Maintenance And Cleaning - Princess 232135 Bedienungsanleitung

with a minimum of 0.7 l and a maximum
of 1 l water.
Filling the jug without the filter
holder
1 Detach the jug from the base.
2 Take hold of the filter holder's grip and
remove the unit from the jug.
3 Fill the jug with the required amount of
water. To avoid damage, fill the jug with
a minimum of 0.7 l and a maximum of
1.7 l water. Make sure that you do not
spill any water on the base.
4 Fit the standard lid to the jug.

Boiling water

1 Place the filled jug on the base, and
insert the plug in the wall socket. Push
the On/Off switch downwards so that
the indicator lamp illuminates.
2 The jug kettle is now switched on, and
the water will now begin to heat. The
jug kettle switches off automatically a
few seconds after the water has come
to the boil. However, this automatic cut-
out operates only when the filter-
holder's lid is closed securely. If so
required, you can stop heating the
water by pushing the On/Off switch
upwards.
3 The indicator light extinguishes once
the jug kettle is switched off.
4 A further quantity of water can be boiled
once the appliance has cooled down
(after about 5 minutes).
5 The kettle is fitted with a triple
safeguard which prevents the kettle
from producing too much steam, boiling
dry, or overheating. The safeguard will
switch off the jug kettle if it is operated
without water. Allow the jug kettle to
cool down for at least 10 minutes before
using it again.
6
Classic Filter Kettle Article 232135 / 232133
Maintenance
and cleaning
• Never use harsh or corrosive cleaning
agents or sharp objects (such as
knives or hard brushes) when
cleaning.
• Before cleaning, make sure that the
appliance is not connected to the
power supply and that it has cooled
down.
• Never use corrosive or scouring
cleaning agents or sharp objects
(such as knives or hard brushes) to
clean the appliance.
• Never immerse the appliance in water.
• Never put the appliance in a
dishwasher.
• Make sure that no moisture can
contact the appliance's electrical
components.
1 Clean the exterior of the appliance with
a damp cloth. Dry the exterior
thoroughly.
Replacing the Brita filter
cartridge
Please refer to the enclosed BRITA kettle
brochure for supplementary information
about the use of the Brita water filter
cartridge.
For optimum performance replace the Brita
water filter cartridge at periodic intervals.
The 'Brita Memo' is an electronic cartridge
exchange indicator. The Memo measures
the recommended time of use of the
cartridge. The Memo's display begins to
flash when the filter cartridge needs to be
replaced.