Chauvet DJ Wedge Tri Schnellanleitung Seite 4

Wedge™ Tri QRG
Overview
(cont.)
AC Power
Power Linking
Fuse
Replacement
Infrared Remote
Control (IRC-6)
IRC Sensor
Fuse Holder
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
For the maximum number of Wedge™ Tri products that you can power link
at each voltage, see the sticker on the product or the User Manual.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The Wedge™ Tri is fully compatible with the Infrared Remote Control
(IRC-6) from Chauvet. For more information on the IRC-6 or to download
instructions, go to www.chauvetlighting.com
Power In
4
Power Out
.
EN
LEDs