Troubleshooting & Faq; Maintenance, Safety And Disposal - Jabra T5330 Multiuse Handbuch

12. Troubleshooting & FAQ
Q: Nothing happens when I try to adjust the clear dial tone.
A: Make sure the base is powered (visual indicator on base unit is steady green). Then establish
a voice link between base and headset (visual indicators on base unit and headset are
flash ing green). Also ensure that the telephone is activated (handset is off the hook or "line"
button is pressed).
Q: I hear myself when I talk.
A: Your transmit volume level (please refer to section 3.10) is probably too high.
Set the transmit volume level to a lower level (3->2, 2->1).
Q: The sound in the headset is of poor quality or the person in the other end can't hear me.
A: Make sure that you have positioned the clear dial tone switch correctly. To do this call a friend
to adjust the clear dial tone switch.
Q: When I press the answer/end button, the GN 1000 RHL lifts, but the call is not connected.
A: Make sure that you are using the telephone's handset port, and not the headset port
(if your telephone has one), when using a GN 1000 RHL for remote answering.
Q: I have moved desk at work. Is it possible to put my headset onto another base?
A: Yes, this is possible. The headset only needs to be paired to the new base. Just follow the
procedure as described in section 7 of this guide.
Q: I cannot hear anything in my headset when using the mobile phone
A:
- Increase the volume on the headset (Or phone).
- As the volume level needed might be different on your deskphone and mobile phone it
might be best to adjust the level on the phones.
- Then use the headset volume level adjustments for general adjustments: Ensure that the
headset is paired with the mobile phone.
- Make sure that the phone is connected to the headset - if it does not connect either from
the phone's Bluetooth menu or by tapping the answer/end button, follow the pairing
procedure (See "Pairing your headset with your mobile phone" in the user manual).
Note: If your desk phone has a volume button, it might help to adjust it to optimize the sound quality in your
headset.
16

13 Maintenance, safety and disposal

Maintenance
The ear hook can be wiped with a dry or slightly damp cloth. The cords and base unit can be dry-
dusted as required. Avoid getting moisture or liquids into any button sockets, receptors or other
openings. Avoid exposing the product to rain.
Children and product packaging
The packaging, including plastic bags and wrapping parts, are not toys for children. The bags
themselves or the small parts they contain may cause choking if ingested.
Batteries and product disposal
Do not expose the headset batteries to heat. Dispose of the product and/or batteries according to
local standards and regulations.
Need more help?
For your country's support details, see the European and Australasia Safety & Declaration or
North American Declaration & Warranty that came with your Jabra T5330 Multiuse.
17