favero CARDWRITER-01 Handbuch Seite 4

ENGLISH
WARNING! Do not remove the TAG from the
reader area while operations are under way
(increasing of credit, zeroing credit,...).
5 F
IRST INSTALLATION
A prepaid card payment system consists of a
CARDWRITER-01 programmer and one or more
CTx Timers. In order to activate the system it is
necessary to choose and assign a system Code to
all products and
CARDWRITER-01 programmer.
For activation, please follow the steps below:
1) Choose a system code consisting of 5 digits
other than 00000 and programme it into the
CARDWRITER-01 programmer and into the CTx
Timers (ch. 7.3).
2) Choose a password consisting of 5 digits other
than 00000 and
CARDWRITER-01 programmer (ch. 7.4).
3) Format the provided
CARDWRITER-01 programmer (ch. 6.5).
4) Add credit to the cards destined for clients (ch.
6.1 and 6.2).
6 O
PERATOR MENU
If there is no card placed on the reader area (see
Fig. 3), only the operator totalizers can be
accessed (see ch. 6.4).
Read card/tag
Press OK for 2s
for operator totalizers
 / +  / -
Fig. 3
The operator menu can be accessed once a card is
placed on the reader area.
If the card contains valid credit, the operator menu
will look as follows (Fig. 4):
00193-M01-01-ML - Manuale uso
a password for
programme it into
cards via
 
BACK OK
Current credit: 10.5Euro
► Add 1.00€
Add 5.00€
Add 10.00€
Add credit
Zero credit
 / +
the
Fig. 4
The first line shows the card's current credit.
Via the [ / ] and [ / ] keys, you can scroll the
menu headings. Press [ /
The subsequent menu headings allow you to add
or zero your current credit.
the
• The first three headings (in Fig. 4 "Add 1.00€",
"Add 5.00€", "Add 10.00€") allow you to add
the
prefixed credit (defined in the administrator
menu, see ch. 7.2), so as to speed up
operations.
• The heading "Add credit" allows you to add an
arbitrary amount of credit.
• The heading "Zero credit" allows you to zero the
card's credit.
6.1 Adding prefixed credit
If for example you select the heading "Add 5.00€",
you will be asked to confirm the operation: press
[ / ] to add credit, or [ /
OK
5). The amount of credit will be added to the
operator and
totalizers (see ch. 6.4 and ch. 7.1 respectively).
Current credit: 10.5Euro
Add 5.00Euro?
OK to confirm
BACK to cancel
 / +
Fig. 5
Pag. 4 / 36

 / -
BACK
] to select a heading.
OK
] to cancel (Fig.
BACK
administrator "Credit Allocated"

 / -
BACK
F
AVERO

OK

OK
E D
LECTRONIC ESIGN