Connect The Led Light Bars; Replacing And Changing Light Bars; Installing The Fixture - Lumatek ZEUS 600W PRO Handbuch

6.3 Connect the LED light bars

Ensure the driver is secured and flip the fixture over
so the driver is now underneath. Insert the end
of the light bar with the hook into the square
hole in Frame A
Assemble the rest of the light bars into the fixture frame as shown in the figure above.

6.4 Replacing and changing light bars

Individual 100W light bars are available to purchase as replacements or with different spectral ratios to adjust
fixture spectral output.
The Zeus Pro fixture's modular design has an intelligent LED driver which can autosense and decrease or
increase power to match the amount of 100W light bars installed on the fixture.
Warning! At least one light bar must be installed in the fixture before switching on.

6.5 Installing the fixture

Warning! Mount the system to something that can hold the weight of the LED fixture.
Ensure all light bars are installed correctly and are secure. Carefully turn the fixture over and attach the
metal cable hangers to the mounting hooks. Hang the fixture in required position and height. For optimal
performance; position fixture 50cm above plant canopy. Ensure the fixture is hung horizontally.
Then insert the other end; align the round hole
on Frame B with the light bar's magnetic end
and insert male pin into female socket.
Ensure magnetic connection is secure.
Attach metal cable hangers
to mounting hooks