Spray Arms; Fault Finding - Siemens se20892 Gebrauchsanweisung

en

Spray arms

Lime and remnants of food in the washing
water can block the nozzles in the spray
arms and and the arm
23 24
mountings .
Inspect the nozzles in the spray arms
for blocked holes due to remnants of
food.
If necessary, pull the lower arm
upwards and lift it off.
Unscrew the upper spray arm
Clean both spray arms under running
water.
Refit the spray arms. Ensure that the
lower arm has locked into place and the
upper one is screwed tight.
Spray arms
54

Fault finding

Resolving minor problems
yourself
Experience has shown that you can
resolve most problems that arise during
normal daily usage yourself, without
having to call out a service engineer. Not
only does this save costs, but it also
means that the appliance is available for
24
use again that much sooner. The following
list of common occurrences and their
.
23
remedies should help you identify the
causes of most problems.
Problems ...
... when the appliance is
switched on
Incorrect language set.
Return to language selection
1. Switch off the appliance.
2. Switch on the appliance, holding
3. Select the language and
The appliance does not start.
down the main switch until the
display is lit.
acknowledge with "ok".
The mains fuse has tripped.
The appliance plug has not been
inserted.
The appliance door has not been
shut properly.
The appliance door was closed
without starting the programme
first.