Display / Keyboard Function - Adam Equipment HIGHLAND Serie Bedienungsanleitung

3.2

DISPLAY / KEYBOARD FUNCTION

The display and keypad have a number of features the key information is shown
below:
KEYS PRIMARY FUNCTION
[On/Off]
To turn the balance On or Off.
[Tare] Tares the balance and shows the net
weight value. Pressing the [Tare] again
will reset another tare value
[%] Enters
function.
[Smpl] Use this key to enter parts counting
mode from the normal weighing
mode.
[Mode] Pressing this key will cycle through the
weighing units which are enabled.
[Print] To print the results to a PC or printer
using RS-232 or USB interface. It also
adds the value to the accumulated
memory if the accumulation function
is not automatic.
© Adam Equipment Company 2014
the percentage weighing
SECONDARY FUNCTION
----
A secondary function of "Enter" key is
for setting
functions.
When in percentage mode, press [%]
key to return to normal weighing
mode. When setting some parameters
this key will move the flashing digit to
the right.
When in parts counting pressing the
[Smpl] will return to weighing mode.
Clears the accumulated value from the
memory when pressed during the total.
When setting some parameters this key
will move the flashing digit to the left.
Displays the unit weight, total weight
and the count when in the parts
counting mode.
Setting parameters it will show the
next option or increase the value of a
flashing digit.
Secondary function is to return to
normal operation when the balance is
in a parameter setting mode.
Setting parameters it will show the
previous option or decrease the value
of a flashing digit.
4 9520revF-Jun14
parameters or other