Epson ELPIF02 Bedienungsanleitung Seite 4

This is a class A product. In a domestic environment this product may cause radio
•
interference in which case the user may be required to take adequate measures.
Special techniques are required to install or remove this product, so make sure you
•
contact a specialist or your local dealer. Failure to do so may cause electric shock or
malfunctions to occur.
Disconnect the power cord from the projector before installing/removing this prod-
•
uct to/from the projector.
Installing/removing the product while the power cord is connected may cause elec-
tric shock to occur.
Do not use sprays that contain ammable gas to remove dust or lint from the prod-
•
uct. The high heat generated inside the projector may cause a re.
• Do not use or install in locations where it may be subject to water or rain, or high
humidity, such as outdoors, in a bathroom, or shower room, and so on. Otherwise, it
could cause a re or electric shock to occur.
• Do not place the product in a location subject to high levels of dust or humidity, or
in a location subject to smoke or steam such as on a work surface or near a humidi-
er. Otherwise, it could cause a re or electric shock to occur.
• Unless you are a quali ed service technician, do not open the product's case unless
instructed to do so in the User's Guide. Never disassemble or remodel the product.
There are high-voltage components inside the product that could cause re, electric
shock, or an accident to occur.
中
• Do not place containers containing water or any chemical products and so on near
文
this product. If anything spills or enters the product, it could cause a re or electric
简
shock to occur.
体
中
文
繁
體
4
Warning