Attaching And Detaching The Control Unit To And From The Camera - Canon MACRO TWIN LITE MT-26EX-RT Basisanleitung

Installing the Batteries / Attaching and Detaching the Control Unit to and from the Camera
Using AA/R6 batteries other than the alkaline type may cause contact
failure because their battery contact shapes are not standardized.
When using the Compact Battery Pack CP-E4N (sold separately), also
refer to the CP-E4N Instruction Manual.
When <
!
recharging, replace the batteries with new ones.
Use a new set of four batteries of the same brand. When replacing the
batteries, replace all four at one time.
AA/HR6 Ni-MH batteries can also be used.
Attaching and Detaching the Control Unit
to and from the Camera
Be sure to turn off the MT-26EX-RT before attaching or detaching it.
> is displayed or the LCD panel display turns off during
Attach the control unit.
1
Secure the control unit.
2
Detach the control unit.
3
Slip the control unit's mounting foot
all the way into the camera's hot
shoe.
Slide the mounting foot lock lever to
the right.
When the lock lever clicks in place, it
is locked.
While pressing the lock-release
button, slide the lock lever to the left
and detach the control unit from the
camera.
13