Environmental Instructions; Warranty - Würth WIG 180 DC Originalbetriebsanleitung

Special functions
Gas test, operating panel test
▸
Simultaneously press the buttons [18/1]
and [18/2] for at least 2 seconds.
The gas valve connects through for 30 seconds,
3
all operating panel indicators light up and the
7-segment display [24] indicates GAS.
▸
The gas and operating panel test can be inter-
rupted by pressing the button [18/1].
Software version
▸
Simultaneously press buttons [18/2] and [20]
for at least 1 second.
The software versions of the operating panel and
3
the main circuit board are displayed.
Master reset
Attention!
All personal settings are lost.
Â
All welding and ancillary parameters plus the
¾
saved jobs are reset to the factory settings
(master-reset function).
▸
Simultaneously press buttons [18/2] and [22]
for at least 5 seconds.
The 7-segment display and all operating panel
3
indicators briefly illuminate as confirmation.
Maintenance and care
WARNING !
Risk of injuries or material damage
Always remove the mains plug
¾
before cleaning the device.
▸
Always keep the device and ventilation slits clean.
Spare parts
If. in spite of careful manufacturing and testing
processes, the device becomes faulty, a repair by
Würth masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the name
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.

Environmental Instructions

Do not throw the device away with
normal household waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally sound manner.

Warranty

We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of pur-
chase through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
We reserve the right to make technical changes.
We accept no liability for printing errors.
29