Further Safety Instructions - Würth EBS 125-E Originalbetriebsanleitung

Risk of severe injuries.
Always wear protective goggles.
¾
Dusts from materials can be harmful to
health.
Use a dust mask or respirator.
¾
▸
Observe the instructions of the accessory manu-
facturer! Protect accessories against grease and
impacts!
▸
Accessories must be stored and handled with
care in accordance with the manufacturer's
instructions.
▸
The workpiece must be resting on a stable sur-
face and secured to prevent slipping, e.g. using
clamping devices. Large workpieces must be
adequately supported.
▸
If attachments with threaded insert are used, the
end of the spindle must not touch the bottom of
the hole in the grinding tool.
▸
Ensure that the thread in the attachment is long
enough to take the length of the spindle.
▸
The thread in the attachment must match the
thread of the spindle.
▸
Foreign bodies entering the machine can cause
the engaging mechanism to block. It is therefore
necessary to regularly, frequently and thoroughly
blow out the machine with compressed air
through the rear ventilation slots with the machine
running. Hold the machine firmly while blowing
out.
▸
Dusts from materials such as lead-based coat-
ings, some wood species, minerals and metals
can be harmful to health. Touching or inhaling
the dusts can lead to allergic reactions and/or
respiratory disorders in the user or in persons in
the vicinity.
16

Further safety instructions

WARNING !
CAUTION !
▸
Certain dusts such as quartz, oak or beech dust
are considered to be carcinogenic, particularly in
combination with additives for wood preservation
(chromate, wood preservatives).
— In order to achieve a high degree of dust extrac-
tion, use a suitable Würth vacuum cleaner (class
M) together with this power tool.
— Ensure good ventilation of the place of work.
— We recommend the wearing of a respirator with
filter class P2.
▸
Observe the applicable regulations in your
country for the materials to be machined.
▸
Materials containing asbestos may only be
machined by qualified persons.
▸
Ensure that the ventilation openings remain free
when working in dusty conditions.
▸
Should it become necessary to remove the dust,
first disconnect the electric tool from the electricity
supply network (use non-metallic objects) and
avoid damaging internal parts.
▸
Damaged or vibrating tools or tools with run-out
must not be used.
▸
Avoid damage to gas or water pipes, electric
cables and load-bearing walls (statics).
When using the machine outdoors:
▸
Install a residual-current circuit breaker with max.
release current (30 mA)!
▸
Pull the plug out of the plug socket before car-
rying out any adjustments, retooling or mainte-
nance.
▸
Replace a damaged or cracked auxiliary handle.
Do not operate the machine with a defective
auxiliary handle.
▸
Replace a damaged or cracked safety hood. Do
not operate the machine with a defective safety
hood.
▸
Use only accessories where the brushes of the
protective guard extend beyond them.