Maintenance And Storage - Lanaform Goby's world Baby Scale Bedienungsanleitung

EN
4. NORMAL WEIGHING FUNCTION :
1) Press the « » button to switch on the scales.
2) 0.000 kg (lb or oz (pounds: ounces) depending on the measuring unit selected) will be displayed
on the screen.
3) Place the baby on the scales. If the baby moves too much, select the «HOLD» function which will
set the baby's weight when they are more still. When the «HOLD» icon stops flashing, the weight
will remain the same for a further 20 seconds.
4) «Err» will be displayed if the scales are overloaded.
5. WEIGHING FUNCTION WITH A TOWEL:
1) Press the « » button to switch on the scales.
2) 0.000 kg (lb or oz (pounds: ounces) depending on the measuring unit selected) will be displayed
on the screen.
3) Place a towel on the scales. The weight of the towel will be displayed.
4) When the «HOLD» icon appears and stops flashing, press the «Tare» button.
5) The «Tare» icon and «0.000 kg» (lb or oz (pounds: ounces) depending on the measuring unit
selected) will be displayed on the screen again.
6) N.B.: Leave the towel on the scales. If you take it off the scales, the screen will show a negative
weight.
7) Place the naked baby on the scales. Repeat the operation with the «HOLD» button as explained
above in the «normal weighing» section, if necessary.

MAINTENANCE AND STORAGE

• Use a soft, damp cloth to clean the Baby Scale.
• Do not use abrasive detergents.
• In case of prolonged lack of use of the device, remove the batteries.
• Store the device in a dry, safe place.
4
kg
Hold
kg
kg
kg
Hold
kg
kg
kg
kg
Hold
kg
kg
Tare
-
kg
Hold
kg
Tare
kg
Tare
Hold
kg
Tare
-
kg
Tare
Hold
kg
Tare