General Information - WIKA mensor CPC2000 Betriebsanleitung

1. General information

1. General information
The model CPC2000 low-pressure controller described in the operating instructions
■
has been designed and manufactured using state-of-the-art technology. All
components are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with
■
international standards.
Further information:
■
Mensor LP
- Internet address:
- Relevant data sheet:
- Application consultant:
EU importer
■
WIKA Alexander Wiegand SE & Co. KG
- Internet address:
- Relevant data sheet:
- Application consultant:
WIKA operating instructions, model CPC2000
www.mensor.com
CT 27.51
Tel: +1-512-396-4200
Fax: +1-512-396-1820
sales@mensor.com
www.wika.de / www.wika.com
CT 27.51
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
EN
5