Setting/Activating The Sleep Timer; Restoring Factory Settings; Displaying The System Version - Medion LIFE P66120 Bedienungsanleitung

11.3. Setting/activating the sleep timer

The device features a sleep timer function, which switches the radio off after a
certain time if no actions have been performed up until then.
 In radio mode, press and hold the MENU button until SET MENU appears
on the display. Use the  or  buttons to select the SLEEP SET submenu.
 Press the ENTER button to navigate to the SET SLEEP menu.
SET SLEEP
− Use the  or  buttons to select a desired sleep timer time (5, 15,
30, 45, 60, 90 or 120 minutes) and confirm with ENTER. The sleep
timer is deactivated in the OFF setting.

11.4. Restoring factory settings

To restore the factory settings of the device, please proceed as follows:
 In radio mode, press and hold the MENU button until SET MENU appears
on the display. Use the  or  buttons to select the FACTORY RESET
submenu.
 Press the ENTER button and confirm the subsequent prompt with YES.
The device is then reset to the factory settings, which means all alarm times,
sleep timers, network and Bluetooth settings etc. are lost. The digital station
search then starts automatically and the device remains in active DAB mode.
The date and time are also synchronised automatically.

11.5. Displaying the system version

Please proceed as follows to display the current software version:
 In radio mode, press and hold the MENU button until SET MENU appears
on the display. Use the  or  buttons to select the SYSTEM VERSION
submenu.
 Press the ENTER button to display the current software version.
 Press the MENU twice to exit the SET MENU again, or wait a few seconds
until the display closes automatically.
You can perform a software update via the side USB connection, if
required.
DE
FR
NL
IT
ES
EN
177