GB
MT
General Description
The illustration of the principal
functioning parts can be found
on the front foldout page.
Scope of Delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
-
Submersible water pump (pump)
-
Angle adaptor + hose adaptor
-
8 m nylon rope
-
Instructional manual
Overview
1 Carrying handle
2 Mains cable
3 Pump casing
4 Pump output
5 Float switch
6 Float switch height adjustment
7 Float switch cable
8 Float switch guide
9 Hose adaptor
10 backflow stop with seal
11 Angle adaptor
12 8 m nylon rope
13 Cable holder
Functional description
The pump is fitted with a float switch,
which automatically switches the equip-
ment on or off.
In case of overload, the pump is switched
off by the integrated thermal protection
switch. After cooling, the motor restarts
automatically.
50
In addition, the pump also has a backflow
stop that prevents water from flowing back,
for example during an interruption in the
power supply.
Technical Data
Submersible Water Pump ...... PTPK 400 A1
Mains connection (U) ........ 230 V~, 50 Hz
Power consumption (P) ..................400 W
Max. discharge rate
(Qmax) ......................approx. 10000 l/h
Max. discharge head (Hmax) .............7 m
Max. depth of immersion ...................7 m
Max. water temperature (Tmax) .......35 °C
Hose connection ........... ½", ¾", 1", 1 ½"
(13 mm, 19 mm, 25 mm, 38 mm)
Tap connection with internal thread
on the angle adaptor ...G 1 ½" (44.9 mm)
on the hose adaptor ..... G 1" (33.3 mm)
Max. foreign body size ................ ø 5 mm
Mains cable ...................................10 m
Weight (incl. accessories) ...............3.8 kg
Safety class .......................................... I
Degree of protection ......................... IPX8
Performance data
The measurement of the maximum perfor-
mance data takes place under optimal con-
ditions, such as a straight, direct exit.