Installing The Monitor On The Wall - Sony Bravia series Handbuch

FW-65BZ35F, FW-55BZ35F
Spacer
Belt F
(20 mm) E
Screw (+PSW 6 x 20) C
FW-49BZ35F, FW-43BZ35F
Screw (+PSW 6 x 20) C
Spacer
(20 mm) E
Belt F
3
Connect the necessary cable(s) to the
Monitor.
Make sure to connect the cables before
installing the Monitor on the wall. You will
be unable to connect the cables when the
Monitor is installed.
Refer to the Reference Guide supplied with
your Monitor.
4
Detach the Table-Top Stand from the
Monitor (FW-65BZ35F, FW-55BZ35F
only).
Pulley B
Pulley B
Soft cloth

Installing the Monitor on the wall

1
Install the Monitor onto the Base.
• For the location of the Pulleys B to the
hang on the Base, refer to the table of
step 3 in "Deciding on the installation
location" on page 19.
• Hold the Monitor securely with both hands
and gently hang the Pulleys B attached to
the rear of the Monitor to the Base,
making sure to confirm the shape of the
holes.
• After installing the Monitor on the wall,
confirm the Pulleys B are firmly latched
into the Base or Base Adaptor.
2-a
B
K
F
GB
23
GB