Klarstein Maverick Bedienungsanleitung Seite 28

EN
28
Hook the hood body
• Hook the hood body to the bracket.
• Level the hood body itself.
• Attach the exhaust pipe to the hood body.
• Connect the chimney bracket (21) to the lower decorative chimney (2.1).
• Attach the chimney bracket (21) to horizontal line A with 2 ST 5*50 screws to
prevent the hood body from accidentally slipping off the chimney mount.
Right
Connections to ducted version air exhaust system
When installing the ducted version, connect the hood to the chimney using either a flexible
or rigid pipe 150 mm or 120 mm, the choice of which is left to the installer.
• If to install a 120 mm air exhaust connection, insert the reducer flange on the hood
body outlet.
• Fix the pipe in position using sufficient pipe clamps (not supplied).
• Remove possible charcoal filters.
Wrong