Jacuzzi frame 100 Bedienung Und Wartung Seite 69

- If the "note" key is pressed when another electronic function is ac-
tive, the current track is displayed, and pressing it a second time will
display volume adjustment.
To return to the display of the main electronic function, wait a
few seconds without pressing any key or press the key related to the
function.
RADIO
T
he radio can be turned on during any function (but not to-
gether with the MP3 player) or alone (in the latter case, the
control panel must be in the "awaiting instructions" mode, refer
to the "Activating the electronic functions" chapter). It may not
be activated when the shower unit has an alarm condition.
u Check that the USB key is not inserted and press the "note"
key: the display will show the following configuration.
MP3
3
u Press the ">" key to select the radio menu (the symbol must be
displayed on a white background).
Then press the "on/off" key.
u The display will show the following, in order:
- the last frequency used and any RDS information;
- the positions in which the preferred frequencies are stored, show-
ing the one in use;
- the volume level indicator.
102.5
1 2 3
RADIO
2 1
4 5
Volume adjustment
u Press the ">" key to increase the volume; or press the "<" key
to decrease it.
Hold down the "<" key, the volume will be lowered immedi-
ately (Mute); press the same key again or the ">" key to restore
the volume.
Frequency regulation
u Press the "on/off" key; the display will show the following
configuration ("+" and "-" will appear; the letter "A" at the top indi-
cates that the automatic frequency search is active):
102.5
1 2
2
1
ù
If no key is pressed for a few seconds, the display will show the
previous menu; to reactivate the "frequency" mode, press the "on/
off" key again).
Press the keys "<" and/or ">" to tune in the first frequency with
a strong signal.
Press the "<" or ">" key for a few seconds to stop the automatic
search, press the key "<" or ">" again for a few seconds to reacti-
vate it.
Storing the frequency
u Once the frequency is adjusted, press the "on/off" key; then
press keys "<" or ">" to select the position where the selected fre-
quency should be stored (the position is shown by a broken out-
line).
102.5
1 2
4
3
69
A
3 4 5
2
3 4 5
4