Technical Specifications - Brevi 365 Gebrauchsanleitung

2) Switch the Receiver on by moving the Channel (2) selector to the A or B channels: the LED (3) is on.
Set the desired sound transmission volume by moving the "Volume" regulator (6).
3) Check that the selected channel is the same in both units.
4) Try the operation of the units with the help of another adult speaking into the Transmitter as you listen to the
Receiver, moving around your house. Detect any area where the signal is weak. Set the volume at the desired
level. Keep in mind that the more you move the transmitter away from the source of the signal, the more you
will have to turn the volume up.
"Voice Activation" Feature
Whenever the control system is operating, if your baby is quiet, the LED (3) is on, on both the Receiver and the
Transmitter. If, on the contrary, the Transmitter detects background sounds or noises, the "Sound Bar" LEDS
(7) are on, depending on the intensity of the signal received.
Troubleshooting
If the Transmitter is too far from the Receiver, the system cannot not work properly: in this case put the two
units nearer to each other.
If the receiver is too close to the Transmitter, an acoustic feedback might be caused. In this case, you should
put the units farther from each other, or turn down the volume of the Receiver. A background noise from the
Receiver may signal that the batteries are exhausting and they need to be replaced.
If the Power Indicator (3) is red, it means that the batteries are exhausted and they need to be replaced.
CARE AND MAINTENANCE OF YOUR BREVI BABY MONITOR
Take exhausted batteries off because they might cause an oxidation and damage the units.
If using the adapters exclusively, or in case of a long period of inactivity of the device, take off the batteries.
Keep the product away from rain and humidity. The units are not water-proof.
Do not use any chemical or abrasive detergents on the units. In order not to damage the device, please use a
damp and soft cloth.
IMPORTANT
Use exclusively batteries of the kind described by the Brevi Company.
When replacing the exhausted batteries, please follow the rules in force regulating their disposal. In
particular, to ensure a safe and environment-oriented disposal, please use a suitable container,.
Insert the batteries or storage batteries, being careful of the polarity. Do not short-circuit the terminals of the
batteries and storage batteries.
Keep the product away from flames or heat sources such as candles.
The product must not be exposed to liquid spillage or spurts: keep away from liquid containing objects, such as
vases.
The product is fit exclusively for in-door use.
The product must be used under the superintendence of adults; it must be kept out of children's reach.

TECHNICAL SPECIFICATIONS

Number of channels: 2
Frequencies: 40,695MHz/40,665MHz.
Power Supply: 1 9V battery (006P, 216) for both Transmitter and Receiver units or 9DCV adapter
7