Remote Controller - Pioneer PD-50AE Bedienungsanleitung

> Before Start > Part Names

Remote Controller

1
2
3
4
5
6
7
8
9
bk
bl
bm
6
> Install > Playback
1. ^ STANDBY/ON button: When the main power of the unit
is on, this turns the unit on or into standby mode. The
bn
main power cannot be turned on or off with the remote
controller.
2. SHUFFLE button: Set shuffle play. (P13)
bo
3. REPEAT button: Set repeat play. (P13)
4. Numbered buttons: Use to directly input the track number
of a music CD when selecting tracks. Also used to enter
track numbers for program play.
5. CLEAR button: Clear the content set for program play.
(P13)
6. DIGITAL FILTER button: Select one of three types of
DIGITAL FILTER. (P15)
7. Cursors, ENTER button: Select the item with the cursors
and press ENTER to confirm.
bp
8. SETUP button: Displays the SETUP menu. (P16)
9. Play buttons:
u : Return to the beginning of the track being played.
Press again to move to the track before.
/h : Play or pause play.
bq
i : Move to the next track.
t : Press and hold to fast-rewind through the track
being played.
g : Stop playback.
y : Press and hold to fast-forward through the track
being played.
br
10.SOURCE button: Switches the source to be played.
11. DIRECT button: Switch the DIRECT mode on and off.
bs
(P15)
bt 12.DISPLAY button: Switch the information on the display.
• Depending on the source, the operation may not start.
ck
13.; OPEN/CLOSE button: Open or close the disc tray.
14.PROGRAM button: Used for program play. (P13)
cl
15.LOCK RANGE button: Displays the LOCK RANGE
ADJUST settings screen. (P15)
16.RETURN button: Returns the display to the previous
state.
Advanced Setup | Others
17.UP SAMPLING button: Switch the UP SAMPLING
feature ON and OFF. (P15)
18.CD/SACD button: Switch between CD/SACD as the
source. When playing a hybrid SACD, the layer being
played switches if you press this during play. (P18)
19.DIGITAL OUT button: Switch the digital output ON and
OFF. (P16)
20.DISPLAY OFF button: Press to turn off the display of this
unit. Press again to turn the display on.
21.DIMMER button: You can adjust the brightness of the
display in three steps. (Default Value: Level 3)
Match the polarity when
inserting the batteries.