Accessories
Operating instructions ..................................................... 1
Rotary arm ......................................................................... 1
Camera mounting base .................................................... 1
Mounting screws for the rotary arm and camera
mounting base
(with flat washers, spring washers)
M5 V 22 mm .................................................................. 7
Camera cable .................................................................... 1
Tally lamp .......................................................................... 1
Tally mounting screws (M3 V 6 mm) .............................. 2
Blank panel for tally ......................................................... 1
Operating precautions
p Handle the unit carefully.
Dropping the unit or subjecting it to strong impact may
give rise to malfunctioning or accidents.
p Turn off the power before connecting or
disconnecting the cables.
Be absolutely sure to turn off the power before connecting
or disconnecting the cables.
p Install the unit near the main power outlet, and
position it in such a way that its power plug can
be plugged into and unplugged from the outlet
easily.
p Do not use the unit outdoors.
p The unit cannot be installed or used in the
following locations:
• Locations (including underneath an eave or window)
where snow can be expected to fall on the unit
• Swimming pools and other locations where chemicals
are used
• Manufacturing plants, kitchens and other locations with
high concentrations of steam, oils and fats as well as
special environments such as locations with flammable
atmospheres
• Locations at sea, along a coastline or where corrosive
gases are generated
• Vehicles, ships and other locations with a high level of
vibration (the unit is not designed to be used in vehicles)
• Locations such as gymnasiums and other sport facilities
where balls or other objects may strike the unit directly
Mounting screw for wire
(with flat washer, spring washer)
M4 V 8 mm .................................................................... 1
Hexagon key wrench ........................................................ 1
AC cable ............................................................................ 2
Drop-prevention wire ....................................................... 1
p Maintenance
Wipe the unit using a dry cloth. To remove stubborn dirt,
dip a cloth into a diluted solution of kitchen detergent,
wring it out well, and wipe the unit gently.
<Caution>
p Avoid using benzine, paint thinners and other volatile
fluids.
p If a chemical cleaning cloth is to be used, carefully read
through the precautions for its use.
5 (E)