DKN technology Xc-170i Montage Und Bedienung Seite 18

Assembly 7
NOTE:
Remove the pre-assem-
bled 2pcs Bolts Socket
Head (88) and 2pcs
NOTE:
Fully tighten 1pc Washer
(67), 1pc Tube Cap (35)
and 1pc Bolt, Socket
Head (94).
NOTE:
Slightly loosen Bolt (88)
Release Pull Pin (54).
Attach Crank Linkage
(40) to Pivoting Arm (48).
Fully secure 1pc Bolt
(75).
Fully tighten 1pc Bolt
(75) on Crank Linkage.