Maintenance; Troubleshooting - Pentair Foleo 5800 XTR Benutzeranleitung

A During regeneration, press the button
or time will be displayed below the button
Note

When a manual regeneration is launched, 100% of the resin bead is regenerated.
8 .

Maintenance

Mandatory
Cleaning and maintenance shall take place at regular intervals in order to guarantee the proper
functioning of the complete system, and be documented in the Maintenance chapter in the User Guide
document.
Mandatory
The maintenance and service operation must be done by qualified personnel only. Failure in
respecting this may void the warranty.
8.1. General system inspection
Mandatory
Has to be done once a year at minimum.
8.1.1. Maintenance instructions
• Disinfect and clean the system at least once a year or if the treated water has an off-taste or an unusual odour.
8.2. Adding salt
Tip

Scan this QR code to download the Salt Reminder application from Pentair in order to
ensure refilling the salt in the brine tank when required.
Tip

Do no fill the brine tank with too much salt if you are approaching to brine tank cleaning
date.
No.
A
Open the salt lid (
B Make sure the brine well (
Dump salt in the funnel (
C
for a minimum of 2 cm.
D
Close the salt lid (
9 .

Troubleshooting

Please follow this procedure for any technical support:
A Collect the required information for a technical assistance request.
→ Product identification (see 2.1. Serial and safety tags location, page 5 and
Original settings, page 2;
→ Error number displayed on the controller;
B Contact your local dealer who installed this device (see contact details on last page).
→ Also call him if the water tastes salty, if the water is not softened or if there is no salt consumption.
Ref. MKT-UG-038 / D - 15.11.2019
to immediately advance to the next cycle step. Once in regeneration, the volume
.



Operation
1 2
) pressing at point ( ).
4
) is closed by its cap.
3
) leaving the brine well (
1
).
4
) uncovered
User Guide Foleo
17 / 116