Inhaltsverzeichnis
Werbung
GENERAL FUNCTIONS
Volume
1. Turn the volume knob to the right to increase the volume. You may also press
VOL + on the remote.
2. Turn the volume knob to the left to decrease the volume. You may also press
VOL - on the remote.
Note: "L00" is the minimum volume and "L30", the maximum volume.
CAUTION: Too high volume, especially when using headphones, can damage
your hearing. For this reason, please turn the volume down.
Mute
Press the Mute button on the remote to turn off the sound. Press again to turn on
the sound again.
Echo/Pitch
Note: The Echo effect can only be activated when a microphone or guitar is connected.
Press this button repeatedly to choose ECHO (reverberation) for microphone/
guitar or PITCH (robot) effect for speaker.
Play/Pause
Press the Play/Pause button to play or pause the music.
Next
®
1. In Bluetooth
mode, press the Next button to go to the next track.
2. When neither microphone nor guitar is connected, press ECHO/PITCH to
enter pitch effect. Then, press the Next button on the tower repeatedly to
increase the level of pitch (robot) for sound of audio device.
3. When a microphone or guitar is connected, press ECHO/PITCH to enter echo/
pitch effect. Then, press the Next button on the tower repeatedly to increase
the echo (reverberation) level of the microphone/guitar or the pitch (robot) of
sound of speaker.
Previous
1. In Bluetooth
®
mode, press the Previous button to go back to the previous
track.
2. When neither microphone nor guitar is connected, press ECHO/PITCH to
enter pitch effect. Then, press the Previous button on the tower repeatedly to
reduce the level of pitch (robot) for sound of audio device.
3. When a microphone or guitar is connected, press ECHO/PITCH to enter echo/
pitch effect. Then, press the Previous button on the tower repeatedly to reduce
the microphone/guitar's echo level or the speaker's sound pitch level.
Male/Female/Voice
Press the MALE/FEMALE/VOICE button repeatedly to change the tone from
male voice to female voice, and back to the original voice of your audio source.
On the remote, it is the M/F/V button.
Voice
Press the VOICE button on the remote to enter obbligato status. Press again to revert.
BLUETOOTH
®
The Bluetooth
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Lexibook® is under license.
Other trademarks and trade names are those of their respective owners.
© 2015 Bluetooth SIG, Inc.
For accurate information about your audio device, please refer to your device's
user manual for details on the Bluetooth
device's Bluetooth
®
pairing/Searching/Setup mode.
1. Press the STANDBY/MODE button to switch on the unit. The Bluetooth
indicator flashes on the LED display which indicates that the Bluetooth
is effective.
2. Please press and hold the PLAY/PAUSE button for about three seconds. The
unit is now ready to be paired.
®
3. Activate the Bluetooth
on your device according to your device's user manual.
®
Turn on the Bluetooth
connectivity and make your device "discoverable".
®
4. The Bluetooth
indicator flashes quickly to indicate pairing operation. Your
®
Bluetooth
device should search and find the device name "K8050", and then
pair to it.
5. Once paired with a device, the Bluetooth
glow steadily. Your device and the tower speaker are now successfully paired.
6. You can now play music from your device through the Bluetooth
7. Set the volume by adjusting the control knob on the tower speaker or the
®
Bluetooth
device. Meanwhile, press the MALE/FEMALE/VOICE button or
ECHO/PITCH to adjust the tone.
8. You may also at the same time play on your guitar or sing into the microphone.
NOTE:
• The previously paired device (make sure the Bluetooth
connect to the tower speaker automatically once the speaker is powered on and
in Bluetooth
®
mode.
• Make sure the effective distance between the Bluetooth
speaker is within 10m when you use the Bluetooth
• If the pairing is unsuccessful, re-pair your Bluetooth
repeating the above steps.
• Please turn off the speaker when it is not being used for a long period of time.
®
SET UP
®
profiles it supports, and how to set the
®
®
®
indicator will stop flashing and will
®
tower speaker.
®
is switched on) will
®
device and the tower
®
function.
®
device with the speaker by
mode
Werbung
Inhaltsverzeichnis
Fehlerbehebung
