Lumbar hydromassage
G The Flexa Thema, models ELT
Features 4 simultaneous jets, whose action involves the lum-
bar area of the body. In the Thema 100 and 120 models, the
layout of the jets was designed so that the two lower ones
act on the calves.
• Adjust the water temperature and set up the function as indi-
cated in the chapter on the "Shower" function.
• (fig. 1) Turn the knob to the indicated symbol. Water will be
dispensed from the lumbar jets (fig. 2-2a).
NOTE
(fig. 3) The intensity of the massage, or the form (or pattern)
of each jet can be modified by turning the appropriate ring
nut. If you turn it clockwise you will have a fan-shaped spray;
if you turn it counter-clockwise you will have a single, con-
centrated jet.
Also, the jets can be inclined about 7° in any direction.
Remember to close the mixer and to place the devia-
tor on "outlet below seat" (fig. 4). If there is a ther-
mostatic mixer, turn the corresponding knob to below
38 °C (fig. 5) and also close the stop tap.
1
2a
3
4
47
38 38
2
5
38°
38