Activating Privacy Mode; Setting The Parents' Unit Reception Volume; Setting The Microphone Sensitivity (Vox); Feeding Timer - Silvercrest BABYTALKER 1030 Bedienungsanleitung

12.3 Activating privacy mode

The Babytalker 1030 operates on free frequencies (PMR - 446 MHz).
Any other PMR device in range and on the same channel can hear the transmitted baby monitor signal.
This also means that the parents' unit can receive the signal from other PMR devices.
To minimise interference from other PMR devices, privacy mode must be activated on both the parents'
and baby unit.
Once the channel on the parents' unit and baby unit is the same,
- press the button once to activate privacy mode on the parents' unit.
10
- Press the button once to activate privacy mode on the baby unit.
17
• When privacy mode is activated,
When privacy mode is activated, the baby unit will transmit the sound in the baby's room
for a short period of 5 seconds every 5 minutes. This reassures you that the baby unit is
operating. The function is not active in normal mode.

12.4 Setting the parents' unit reception volume

There are 8 volume levels.
- Press button
8
- Press button
6

12.5 Setting the microphone sensitivity (VOX)

The baby unit operates on VOX mode. This means that the baby unit starts transmitting as soon as the
microphone detects sound. The sensitivity of the sound detection can be changed by the user.
When you increase the sensitivity, the baby unit picks up quieter sounds.
The VOX sensitivity can be adjusted by turning the VOX sensitivity switch
- Clockwise to the lowest VOX sensitivity position
- Anti-clockwise to the highest VOX sensitivity position
• Only adjust the VOX level once you have set the channel and privacy mode.

12.6 Feeding timer

The feeding timer is a count down timer that can be used for generating an alarm sound to remind you of
the next feeding or medicine time.
To turn on the count down timer and set the timer.
- Press and hold the set button
is displayed.
- Press the channel up
- Press the channel up
- Press the set button
Once the alarm is audible, press any button (except the On/Off button) to deactivate.
14
to increase the volume.
to decrease the volume.
for 5 seconds. The feeding timer icon and feeding time interval
10
button to select the hour.
3
button to select the minutes.
4
to confirm.
10
is displayed.
:
24
Babytalker 1030