Herunterladen Inhalt Inhalt Diese Seite drucken

Operation: Remote Control; Troubleshooting - Salamander Designs FPS series Montageanleitung

Inhaltsverzeichnis

Werbung

1. Re-install the inner panel using 2 screws removed in first step.
2. Re-install panel by aligning all 4 screws protruding from panel through
the keyhole shapes on stand. Note: Outer panel may be secured
in place by tightening the fasteners on the backside of the panel.
1

Operation: Remote Control

• Hold down the "down" button to initialize unit.
• Up button will raise display to presentation mode
• Down button will lower display to transport mode.

Troubleshooting

• Double check that power cord is firmly plugged into power supply
Hold down the "down" button continuously for several seconds to reset unit
• More troubleshooting and repair information found on page four of this manual
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS
BLACK
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter
any problem with your Salamander product, let us know. We are here to make it right. 1.800.535.5659 - 860.761.9500
Full warranty including limitations and warranty claim information may be found at:
www.salamanderdesigns.com/commercial/warranty
Salamander Mobile Interactive Display Stands
COLOR
WHITE
2
FPS1W/GG
E479586
501-685 [6.18]
page 9 of 22

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fps 1w/gg

Inhaltsverzeichnis