Fitting The Mattress - Casualplay bed & go Anweisungen

IMPORTANT!
KEEP FOR FUTURE REFERENCE
WARNING:
WARNING:
It is dangerous to use this reclined cradle on an elevated surface, e.g. a table.
WARNING:
WARNING:
WARNING:
WARNING:
- This reclined cradle does not replace a cot or a bed. Should your child need to sleep,
then it should be placed in a suitable cot or bed.
- Do not use the reclined cradle if any components are broken or missing.
- Do not use accessories or replacement parts other than those approved by the manufacturer.
- Keep the BED & GO away from sources of heat, such as electric or gas heaters, etc.
- All the assembly joints should always be correctly fastened in place and regularly checked.
- Do not use the reclined cradle as a rocker.
User Instructions
Unfolding
- Release the folding clip (fig.1).
- Unfold the structure as shown in figure 2. It will click when correctly fastened
into place.

Fitting the mattress

- Place the mattress on the "bed & go", as shown in figure 3, making sure that
the fastening straps are in the correct position (fig.4).
- Fasten the headrest straps through the slots (fig.5), and fasten the buckle
(fig.6).
- Lastly, fasten the strap on the underneath to the structure (fig.7).
8
Never leave the child unattended.
This reclined cradle is not intended for prolonged periods of sleeping.
Always use the restraint system.
Do not use the reclined cradle once your child can sit unaided.
This reclinable hammock is for children with a maximum weight of 9 kg.