For Your Safety - Davin DV-12 Anleitung

1 = Continue 'ON'
0 = Everything 'OFF'
= The DV-12 switches at the set times.
• Put the 3-position switch on the clock
• Now we have to determine when the DV-12
needs to be switched 'ON' and 'OFF'.
• Therefore, the pins (the so called 'running
weights') that are around the clock need to be
pushed out.
Are the pins pushed INWARDS; The clock will
switch 'OFF'.
Are the pins pushed OUTWARDS; The clock
will switch 'ON'.
• To have the timer switch between 2 times (the
'ON' time, and the 'OFF' time), ALL the pins
between those 2 times need to be pushed out.
• The shortest switch position of the clock is
15 minutes.
• When you have determined the 'ON' and
'OFF' times, turn the clock slowly (manually)
clockwise to make sure everything is correct.
• If you are sure that everything switches at the
right time, the DV-12 is ready for use.
8
DV-12 Binnenwerk PMS.indd 6
Manual DV‑12
• The correct operation of the DV-12 is only
.
• Although it is possible to install the DV-12
• Before installing the DV-12, the 220V voltage
• This guide should only be used for the DV-12.
• DAVIN
• To qualify for this warranty, you are required
• If changes are made to DAVIN
• The DAVIN
• Neither the manufacturer, nor the importer,

1.6 FOR YOUR SAFETY

guaranteed, if you observe this manual.
yourself, we recommend to have this done by
a certified installer.
MUST be taken off the power point (Check
this!)
products are covered by a 1-year
®
warranty.
to return the DV-12 to the point of sale.
without the express and written prior
permission of the manufacturer, the warranty
will become void.
warranty will also become void
®
with improper installation of the DV-12.
nor the retailers of the DV-12 are liable for
damages arising from the use of the DV-12.
SERVICE NUMBER / HELPDESK:
+31 (0)6 – 14 813 447
products
®
30-10-2012 14:08:21
1
E
q
6
1
D
C
P
G
1
P
g
p
e
u
D
r
u
E
6
D
(
1
E
s
D
¡
E
D
•
•