DeWalt DCR006 Betriebsanleitung Seite 56

english
NOTE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery pack to
be tested at an authorised service centre.
HOT/COLD PACK DELAY
When the charger detects a battery that is too hot or too cold, it
automatically starts a Hot/Cold Pack Delay, suspending charging until
the battery has reached an appropriate temperature. The charger then
automatically switches to the pack charging mode. This feature ensures
maximum battery life.
A cold battery pack will charge at about half the rate of a warm battery
pack. The battery pack will charge at that slower rate throughout the
entire charging cycle and will not return to maximum charge rate even if
the battery warms.
LITHIUM ION BATTERY PACKS ONLY
XR Li-Ion tools are designed with an Electronic Protection System that will
protect the battery against overloading, overheating or deep discharge.
The speaker will automatically turn off if the Electronic Protection System
engages. If this occurs, place the Li-Ion battery on the charger until it is
fully charged.
Important Safety Instructions for All Battery Packs
When ordering replacement battery packs, be sure to include catalog
number and voltage.
The battery pack is not fully charged out of the carton. Before using the
battery pack and charger, read the safety instructions below. Then follow
charging procedures outlined.
• Do not charge or use battery in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Inserting or
removing the battery from the charger may ignite the dust or fumes.
• Never force battery pack into charger. Do not modify battery
pack in any way to fit into a non-compatible charger as battery
pack may rupture causing serious personal injury.
54
READ ALL INSTRUCTIONS